AUTONET TV

Automotive Tips from Franklin Auto Service: Rotor Problems

The brake rotor, or disc, is attached to your wheel. The brake pads rub on the rotor to slow your car when you are driving in Franklin.

Rotors can warp, crack or become misaligned. They can also be damaged by worn out brake pads that scratch grooves into the surface. These conditions result in less contact surface for the brake pads, leaving you with reduced braking power.

Over time and miles, rotors can also wear down below safe specifications. It is important for Franklin drivers to know that simply replacing brake pads on a wheel with a bad rotor will not solve the problem. Depending on their condition, rotors may be resurfaced or replaced.

Brake noise or a pulsation in the brake pedal are signs of potential brake problems that should be addressed right away. If you have any brake concerns, please have your friendly and professional Franklin Auto Service tech perform a thorough inspection.

Give us a call.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net

Your Biggest Fan (Radiator Fan Problems)

Your vehicle's engine makes a lot of heat when it's powering you down the road, so it needs a way to get rid of that energy.  That's why your vehicle has a cooling system, complete with a radiator and one or two radiator fans, also called cooling fans.  Those fans make sure air keeps moving across the radiator so that the heat stored in the coolant can be dissipated outside when the vehicle is stopped or not traveling fast.

Radiator fans can develop problems and can stop working properly or stop working altogether.  Some signs to look for? If you're driving slowly and idling and you see your temperature gauge moving toward the red or hot zone, that could spell trouble.  Another thing you may notice when a radiator fan is failing is that there may be a loud noise coming from the engine compartment.

There are two types of radiator fans.  One is mechanically connected to the engine and uses the engine's rotational energy to turn it.  The other is an electric fan and is the type used in most newer vehicles.  In the electrical type, one of the components, such as a relay or fuse, may fail, causing the fan to stop turning.  In the mechanical type, since it's driven by a pulley/belt mechanism, one of those components may break or stop working properly.  A clutch can wear out or a belt may slip or break. 

When your cooling fan isn't working properly, it may cause your engine to overheat which could lead to expensive damage. That's why it's important to make sure you visit your service facility if you notice any of these symptoms.  A technician is trained to diagnose the problem and make sure your radiator fan is doing its job.  When it comes to your vehicle, your radiator fan really is your biggest fan.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net

For Brakes' Sake (Brake Rotor Service in Franklin)

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your Franklin Auto Service service advisor can make the best decision on which direction you want to go with your new brakes.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net